Frizzlife 600 GPD Tankless Reverse Osmosis Water System With Alkaline & Remineralization, PD600-TAM3
Certification
Certification
Service & Benefits
Discount Code FAQ
1.How do I use the discount code?
Copy the discount code from the product page,and then apply the discount code at check out.
2.Can I redeem multiple discount codes?
No.Discount codes cannot be combined.Only one code can be applied per order.
3.Why is my discount code invalid?
1) The discount code is not applicable to the specific items you want to buy
2) The discount code wasn't entered correctly
3) The discount code has expired
4) The discount code is not from frizzlife official websiteIf you have any questions,please feel free to reach out to ourcustomer service team:support@frizzlife.com
key Features
【Remineralization & Alkalization】: The water from RO membrane is slightly acidic, which also removes natural mineral. The 3rd stage of filter solves both issues of conventional RO systems! It balances the alkalinity of RO water and adjusts the PH to more than 7.5. Drinking weakly alkaline water is beneficial to your health. It also restores health-benefiting essential minerals to your water. Frizzlife PD600TAM3 produces healthiest and greatest tasting water for you.
【600 GPD High Water Flow】: PD600 filter system adopts internal prompt and can produce 600 gallons water per day. High capacity can serve the daily water needs of large family. Water flow is fast and stable, the system can fill a 330ml cup of water in about 10 seconds. Get a full cup of fresh RO water in a snap!
【2:1 Low Pure to Drain Ratio】: Thanks to advanced water-saving technology, Frizzlife PD600 RO system maximizes the efficiency and can save your water up to 450% compared with conventional RO filter systems on market! Being both economic and environmental friendly, it makes your water bills more affordable. Over the life of the system, PD600 RO filter system pays for itself in water savings!
【Smart LED Display & Quick Change】: The smart display panel clearly tells real-time out TDS and remaining lifespan of each filter. With all parts included and well-organized instructions and videos, Frizzlife PD600 RO filter can be completely installed in a few minutes by yourself.
【No Tank Design Under Sink Reverse Osmosis System】: Frizzlife PD600 adopts a tankless design. A compact and sleek filter system with a small and convenient footprint takes up less space, saves storage under the kitchen sink! No tank also means no more secondary pollution. Guaranteed to provide ultra-pure, safe, and clean water for you and your family.
Specs
| Model No. | PD600-TAM3 | Filter Cartridge Inside | ASR211, ASR212, TAM3 |
| Product Dimensions | 14.7 x 5.3 x 15.5 inches | Item Weight | 33.06 lb |
| Working Pressure | Min.20psi Max.80psi | Flow Rate | 0.41 GPM |
| Rated Voltage | 110-240 VAC | Frequency | 50-60 Hz |
| Rated Power | 85 W | Operating Temperature | Min.39ºF, Max 100ºF |
Replacement Filters
User Manual
FAQ
Q: Why there are many white bubbles in the water?
A: Normally for the first time use of the RO system, the water seems to have white bubbles in it,
which is normal and totally drinkable. It is because when the pump is pressurizing the water, it
will pressurize the air at the same time. It will make the air molecules smaller, thus the solubility
further increases. The air can’t be released at that time because of the pressure in the RO system.
However, when you turn on the tap to get a cup of water, the pressure of air is released. So you
will see a huge number of bubbles in the water. It looks cloudy and white, but they are just
bubbles. After you put the water still for a while, all bubbles will be gone, the water is totally
good for drinking.
Q: TDS tester pen shows higher result than the TDS number displayed on the PD600-TAM3?
A: It is because the TAM3 filter, the post filter, adds the minerals to the water. Normally the TAM3
will increase the TDS by 10-30 ppm. If the system hasn’t been used for a while, the TAM3 will
restore more minerals to the water, and at that time the water is very good, the PH level will be
more than 9.
Q: Why TDS is higher at the beginning, but back to normal range after about one minute?
A: Osmosis is a natural phenomenon happens in all RO system, no matter if you have a conventional
RO system or tankless RO system. When the RO system starts to work, pressure from the pump
overcomes natural osmotic pressure, forcing feed water through the RO membrane that removes
the impurities. When the RO system stops working, the pump stops offering pressure as well. At
that time, because of different concentrations, a small fraction of ions will enter into pure water
and cause TDS to rise by a small amount. However, even if the TDS reading is a little high at the
beginning, the quality water is still unbeatable by any other filtration methods including carbon,
KDF, ceramic, UF, UV, etc.. The water is totally good to drink and you don’t have to wait for about
1 minute to get the water, since the whole system will not release any harmful substances to the
water. The TDS removing rate for PD600-TAM3 is about 94-95%, if your incoming TDS is high, the outlet
TDS will be high too.
Q: How does the TDS display on the machine work?
A: When the system is running, the TDS sensor in the PD600-TAM3 will keep testing the water quality
every 1 minute. Therefore, the TDS result you see from the machine is from the last test memory.
If you want to have the real-time TDS result, please let the machine run for about 1 minute.
Q: If I don’t want to use the TAM3, how should I disconnect it?
A: You don’t have to disconnect the tubing and the fittings on the TAM3. You only need to unscrew
the TAM3 filter and the water still can go through.
Q: My granite is thicker than 1.5 inch and the faucet stem is not long enough, what should I do?
A: Please feel free to contact us at support@frizzlife.com to claim for a longer thread stem.
